Creating a shield tree
From EastKingdomWiki
(Difference between revisions)
(added info) |
|||
| Line 1: | Line 1: | ||
==Materials needed== | ==Materials needed== | ||
| - | 1 12' 2x4 | + | 1 12' 2x4 <br> |
| - | 2 8' 2x4's | + | 2 8' 2x4's <br> |
| - | 1 24" x 3 1/2" piece of 1/4" luan plywood or equivalent | + | 1 24" x 3 1/2" piece of 1/4" luan plywood or equivalent<br> |
| - | 1/2 sheet 3/4" plywood | + | 1/2 sheet 3/4" plywood<br> |
| - | 4 3/4" x 48" hardwood dowels | + | 4 3/4" x 48" hardwood dowels<br> |
| - | 8 standard door hinges (there are probably better options out there, I used what I had on hand) | + | 8 standard door hinges (there are probably better options out there, I used what I had on hand)<br> |
| - | 2 5/8" x 6" shoulder bolts w/nuts and washers | + | 2 5/8" x 6" shoulder bolts w/nuts and washers<br> |
| - | ~10 4" screws | + | ~10 4" screws<br> |
| - | 1 3-4' strap. (we used nylon because, again, it was what we had.) | + | 1 3-4' strap. (we used nylon because, again, it was what we had.)<br> |
| - | + | <br> | |
| - | Full height is 15' 6". | + | Full height is 15' 6".<br> |
| - | + | <br> | |
Disclaimer: This is a prototype that I completely made up as I went along. If anyone has better ideas for assembly, materials, design.... whatever: PLEASE, feel free to run with it. | Disclaimer: This is a prototype that I completely made up as I went along. If anyone has better ideas for assembly, materials, design.... whatever: PLEASE, feel free to run with it. | ||
Revision as of 20:21, 29 March 2011
Contents |
Materials needed
1 12' 2x4
2 8' 2x4's
1 24" x 3 1/2" piece of 1/4" luan plywood or equivalent
1/2 sheet 3/4" plywood
4 3/4" x 48" hardwood dowels
8 standard door hinges (there are probably better options out there, I used what I had on hand)
2 5/8" x 6" shoulder bolts w/nuts and washers
~10 4" screws
1 3-4' strap. (we used nylon because, again, it was what we had.)
Full height is 15' 6".
Disclaimer: This is a prototype that I completely made up as I went along. If anyone has better ideas for assembly, materials, design.... whatever: PLEASE, feel free to run with it.
Tools needed
Drill Saw
Directions
http://2005roque.smugmug.com/Other/List-Tree/11447314_aYXdS#804897157_4dL5v
