Creating a shield tree
From EastKingdomWiki
(Difference between revisions)
(New page: ==Materials needed== * ==Tools needed== * ==Directions== # ==More Information== *Creating a device shield for the Crown Tourney heraldry trees Category:Articles) |
|||
| Line 1: | Line 1: | ||
==Materials needed== | ==Materials needed== | ||
| - | + | ||
| + | 1 12' 2x4 | ||
| + | 2 8' 2x4's | ||
| + | 1 24" x 3 1/2" piece of 1/4" luan plywood or equivalent | ||
| + | 1/2 sheet 3/4" plywood | ||
| + | 4 3/4" x 48" hardwood dowels | ||
| + | 8 standard door hinges (there are probably better options out there, I used what I had on hand) | ||
| + | 2 5/8" x 6" shoulder bolts w/nuts and washers | ||
| + | ~10 4" screws | ||
| + | 1 3-4' strap. (we used nylon because, again, it was what we had.) | ||
| + | |||
| + | Full height is 15' 6". | ||
| + | |||
| + | Disclaimer: This is a prototype that I completely made up as I went along. If anyone has better ideas for assembly, materials, design.... whatever: PLEASE, feel free to run with it. | ||
==Tools needed== | ==Tools needed== | ||
| - | + | Drill | |
| + | Saw | ||
==Directions== | ==Directions== | ||
| - | # | + | http://2005roque.smugmug.com/Other/List-Tree/11447314_aYXdS#804897157_4dL5v |
==More Information== | ==More Information== | ||
Revision as of 20:19, 29 March 2011
Contents |
Materials needed
1 12' 2x4 2 8' 2x4's 1 24" x 3 1/2" piece of 1/4" luan plywood or equivalent 1/2 sheet 3/4" plywood 4 3/4" x 48" hardwood dowels 8 standard door hinges (there are probably better options out there, I used what I had on hand) 2 5/8" x 6" shoulder bolts w/nuts and washers ~10 4" screws 1 3-4' strap. (we used nylon because, again, it was what we had.)
Full height is 15' 6".
Disclaimer: This is a prototype that I completely made up as I went along. If anyone has better ideas for assembly, materials, design.... whatever: PLEASE, feel free to run with it.
Tools needed
Drill Saw
Directions
http://2005roque.smugmug.com/Other/List-Tree/11447314_aYXdS#804897157_4dL5v
